CIOKS DC7 to Neural DSP Quad Cortex Mini 12V Locking Current Tripler Cable

Description

Power your Neural DSP Quad Cortex Mini from a CIOKS DC7 with this 20-inch Logsdon Audio Current Tripler Power Adapter Cable. It combines three isolated DC7 outputs into one right-angle locking connection.

• Power supply end — Three RCA plugs for isolated CIOKS DC7 outputs

• Device end — Right-angle 5.5 × 2.1 mm locking DC barrel plug, center-negative

• Cable length — 20 inches

• Part number — YRC21CT-N-LC

Quad Cortex Mini setup

With the CIOKS DC7 switched off, set all three isolated outputs you’ll be using to 12 V DC. Connect one RCA plug to each output, then insert and lock the barrel plug into the Quad Cortex Mini. Switch on the DC7. Three outputs rated at 500 mA each provide a combined rated capacity of 1,500 mA at 12 V.

The cable combines available current and passes through the selected voltage. Set all three outputs to 12 V DC before powering on.

Included — One Logsdon Audio Current Tripler Adapter Cable. CIOKS DC7 power supply and Quad Cortex Mini are not included.